Steel case for HiFiBerry DIGI, PI 4, V2
Steel case for HiFiBerry DAC+/ADC, Pi 4This is our most robust case. Made completely from steel, it’s durable and looks very nice. The new version 2 of the case also allows to use it with the Digi+ I/O.
SKU: ZZ35-350129
HiFiBerry DAC2 pro
HiFiBerry DAC2 proThis is our HiFiBerry DAC2 Pro with a pair of gold-plated RCA jacks. It can be simply plugged onto your Raspberry Pi, without any soldering.DESCRIPTIONOur HiFiBerry DAC2 Pro is the sucessor of your popular DAC+ Pro. It comes with integrated dual-domain low-jitter clocks and gold-plated RCA connectors. It features and on-board headphone amplifier and can be upgraded with the DSP add-on module.It can be simply plugged onto your Raspberry Pi, without any soldering. FACTSStereo outputDedicated...
SKU: ZZ35-350127
HiFiBerry DAC+ standard – RCA version
HiFiBerry DAC+ standard – RCA versionOur HiFiBerry DAC+ comes with a pair of RCA jacks. It can be simply plugged onto your Raspberry Pi, without any soldering. Equipped with a 192kHz/24bit Burr-Brown digital-to-analog converter it offers high-end sound quality.Weight 20 gDimensions 5.5 × 6.5 × 1 cm
SKU: ZZ35-350123
HiFiBerry DAC+ ADC
HiFiBerry DAC+ ADCThe HiFiBerry DAC+ ADC is a high-resolution digital-to-analog and analog-to-digital converter for the Raspberry Pi (newer models with 40 pin GPIO connector). This is a special sound card for the Raspberry Pi, optimized for one specific use case: the best audio playback quality. It is specifically designed for applications that do not only need playback, but also recording functionalities.FactsStereo input and outputDedicated 192kHz/24bit high-quality Burr-Brown DACDedicated 192kHz/24bit...
SKU: ZZ35-350122
HiFiBerry Digi+ – standard version
HiFiBerry Digi+ – standard versionThis is our HiFiBerry Digi+ in the standard version with optical and electrical digital audio outputs.The HiFiBerry Digi+ is a high-quality S/PDIF output for the Raspberry Pi. It uses the I2S sound port that connects directly to the CPU without the need for an additional USB conversion. It supports sample rates up to 192kHz/24bit.The standard version features an optical output (TOSLink) and an electrical output. Weight: 20 gDimensions: 5.5 × 6.5 × 1.5 cmCompatible with:...
SKU: ZZ35-350121
Steel case for HiFiBerry DAC+/ADC, PI 4, V2
This is our most robust case, made completely from steel. It is ideal for environments that need something rugged or for people that don’t like plastic. It is designed for the HiFiBerry DAC+, DAC+ ADC and DAC2.New version 2 of this case is a bit higher to allow to mount a DAC and an additional DSP board. This requires an additional screw/spacer set that will be available soon.
SKU: ZZ35-350128
HiFiBerry DAC+ Zero
This is our smallest board in the Raspberry Pi Zero form factor. It can be used not only with the Raspberry Pi Zero, but also with the bigger Raspberry Pi B+/2 and 3.Note that for the Raspberry PI zero, you need to solder a 40-pin male header to the board. This header isn’t included, but you can order it from us. We also recommend to order a set of spacers (these are not included).Sometimes it just has to be small. For this use case we have build the DAC+ Zero, that fits perfectly onto a Raspberry Pi Zero. It...
SKU: ZZ35-350126
HiFiBerry Amp2
HiFiBerry Amp2 The HiFiBerry Amp is a high-quality, highly efficient Class-D power amplifier for the Raspberry Pi.Mount it onto the Raspberry Pi and you have a stereo audio system. You only have to connect your loudspeakers. It provides up to 60W power. You only need a single 12-24V power supply to power the Raspberry Pi and the Amp2. With 4 Ohm speakers, we recommend 12-18V. Higher operating voltages are only recommended with 8 Ohm speakers. However, even with 8 Ohm speakers an 18V power supply is the best choice...
SKU: ZZ35-350125
POWERTECH USB κάρτα ήχου 7.1CH, με έξοδο μικρόφωνου και ακουστικού
POWERTECH USB κάρτα ήχου 7.1CH , με έξοδο μικρόφωνου και ακουστικούΗ USB Κάρτα Ήχου αποτελεί έναν εύκολο τρόπο σύνδεσης ηχείου, μικροφώνου ή ακουστικού στον υπολογιστή/laptop σε περίπτωση που δεν διαθέτει κάρτα ήχου, αντιμετωπίζει πρόβλημα με την ήδη υπάρχουσα ή για βελτίωση της ποιότητας του...
SKU: ZZ35-350124
HiFiBerry MiniAmp
HiFiBerry MiniAmpThis is our smallest amplifier board, designed for the Raspberry Pi Zero. It can be used not only with the Raspberry Pi Zero, but also with the bigger Raspberry Pi B+/2 and 3.DescriptionSometimes it just has to be small. For this use case we have built the MiniAmp, that fits perfectly onto a Raspberry Pi Zero. While its Class-D amplifier provides only 3 Watts of power, this if often enough for small music players like kitchen radios, a radio clock or a small music player for your kids. The board...
SKU: ZZ35-350120
POWERTECH ηχεία Premium sound PT-845, 2x 3W, 3.5mm, μαύρα
POWERTECH ηχεία Premium sound PT-845, 2x 3W, 3.5mm, μαύραΣύστημα ηχείων της σειράς Premium sound της Powertech, κατασκευασμένο σύμφωνα με τα πλέον υψηλά ποιοτικά standard, με σύγχρονο design και εξαιρετική ποιότητα ήχου.Είναι μικρά και βολικά, ιδανικά για χρήση σε desktop PC ή laptop. Η καμπίνα τους είναι κατασκευασμένη από ξύλο,...
SKU: ZZ35-350118
Raspberry Pi IQaudio Codec Zero
Raspberry Pi IQaudio Codec ZeroQaudio Codec Zero is a Raspberry Pi Zero-sized audio I/O HAT. It delivers bi-directional digital audio signals (I2S) between Raspberry Pi Zero and its onboard Dialog Semiconductor DA7212 codec. Codec Zero supports a range of input and output devices, from the built-in MEMS microphone to external mono electret microphones and 1.2W, 8Ω mono speakers.Getting startedIQaudio Codec Zero has GREEN (GPIO23) and RED (GPIO24) LEDs that can be used for status, and a tactile button (GPIO27) that...
SKU: ZZ35-350117
Raspberry Pi IQaudio DigiAMP+
Raspberry Pi IQaudio DigiAMP+Qaudio DigiAMP+ uses the Texas Instruments TAS5756M PowerDAC to deliver direct connection to PASSIVE stereo speakers at up to 2x35wpc with variable output. Ideal for a Raspberry Pi-based hi-fi system.Συμβατό κουτάκι για το IQaudio DigiAMP+HighPi Pro Case with Universal Port for Raspberry Pi 4Getting startedIQaudio DigiAMP+ connects to the 40-pin GPIO header of Raspberry Pi 1 Model B+, Raspberry Pi 2, Raspberry Pi 3, or Raspberry Pi 4 with no need for soldering....
SKU: ZZ35-350116