MAXIM 17000E
MAXIM MAX17000E, 17000EThe MAX17000 pulse-width modulation (PWM) controller provides a complete power solution for notebook DDR, DDR2, and DDR3 memory. It comprises a stepdown controller, a source/sink LDO regulator, and a reference buffer to generate the required VDDQ, VTT, and VTTR rails. The VDDQ rail is supplied by a step-down converter using Maxim’s proprietary Quick-PWM™ controller. The high-efficiency, constant-on-time PWM controller handles wide input/output voltage ratios (low duty-cycle applications)...
SKU: ZZ10.CIC155
RT8166B
Richtek RT 8166BThe RT8166B is a dual single-phase PWM controller with integrated MOSFET drivers, compliant with Intel IMVP7 Pulse Width Modulation Specification to support both CPU core and GPU core power. This part adopts G-NAVPTM (Green-Native AVP), which is a Richtek proprietary topology derived from finite DC gain compensator in constant ontime control mode. G-NAVPTM makes this part an easy setting PWM controller to meet all Intel AVP (Active Voltage Positioning) mobile CPU/GPU requirements. The RT8166B uses...
SKU: ZZ10.CIC154
MAXIM MAX1999
The MAX1999 evaluation kit (EV kit) demonstrates the MAX1999’s standard application circuit. This DC-DC converter steps down high-voltage batteries and/or AC adapters, generating system supplies for notebook computers. The MAX1999 EV kit provides dual 5V and 3.3V output voltages from a 7V to 24V battery input range. It delivers up to 5A output current for the 5V output and 5A for the 3.3V output with greater than 90% efficiency. The EV kit operates at 200kHz/300kHz switching frequency (5V/3.3V, respectively) and...
SKU: ZZ10.CIC152
MAXIM MAX1845
The MAX1845 is a dual PWM controller configured for step-down (buck) topologies that provides high efficiency, excellent transient response, and high DC output accuracy necessary for stepping down high-voltage batteries to generate low-voltage chipset and RAM power supplies in notebook computers. The CS_ inputs can be used with low-side sense resistors to provide accurate current limits or can be connected to LX_, using low-side MOSFETs as current-sense elements. The on-demand PWM controllers are free running,...
SKU: ZZ10.CIC151
MAXIM 17009G
The MAX17009 is a 2-phase, step-down interleaved, fixed-frequency controller for AMD’s® serial VID interface (SVI) CPU core supplies. Power-on detection of the CPU configures the MAX17009 as two independent single-phase regulators for a dual CPU core application, or one high-current, dual-phase, combined-output regulator for a unified core application. A reference buffer output (NBV_BUF) sets the voltage-regulation level for a North Bridge (NB) regulator, completing the total CPU cores and NB power requirements....
SKU: ZZ10.CIC150
OUT OF STOCK
MAXIM MAX1987
The MAX1987/MAX1988 are dual-phase, Quick-PWM™, step-down controllers for IMVP-IV™ CPU core supplies. Dual-phase operation reduces input ripple current requirements and output voltage ripple, while easing component selection and layout difficulties. The QuickPWM control scheme provides instantaneous response to fast load-current steps. The MAX1987/MAX1988 include active voltage positioning with adjustable gain and offset, reducing power dissipation and bulk output capacitance requirements. The MAX1987/MAX1988...
SKU: ZZ10.CIC149
Διαθεσιμότητα:
Μη Διαθέσιμο
MAXIM 17040
The MAX17040/MAX17041 are ultra-compact, low-cost, host-side fuel-gauge systems for lithium-ion (Li+) batteries in handheld and portable equipment. The MAX17040 is configured to operate with a single lithium cell and the MAX17041 is configured for a dual-cell 2S pack. The MAX17040/MAX17041 use a sophisticated Li+ battery-modeling scheme, called ModelGauge™ to track the battery’s relative state-of-charge (SOC) continuously over a widely varying charge/discharge profile. Unlike traditional fuel gauges, the...
SKU: ZZ10.CIC148
MAXIM 1540AE
MAXIM 1540, MAX1540A, 1540AEThe MAX1540A/MAX1541 dual pulse-width modulation (PWM) controllers provide the high efficiency, excellent transient response, and high DC-output accuracy necessary for stepping down high-voltage batteries to generate low-voltage chipset and RAM power supplies in notebook computers. The Maxim proprietary Quick-PWM™ controllers are free running, constant on-time with input feed forward. This configuration provides ultra-fast transient response, wide input-output (I/O) differential range,...
SKU: ZZ10.CIC147
MAXIM MAX1907A
The MAX1907A/MAX1981A are single-phase, QuickPWM™ master controllers for IMVP-IV™ CPU core supplies. Multi-phase operation is achieved using a Quick-PWM slave controller (MAX1980). Multiphase operation reduces input ripple current requirements and output voltage ripple while easing component selection and layout difficulties. The MAX1907A/ MAX1981A include active voltage positioning with adjustable gain and offset, reducing power dissipation and bulk output capacitance requirements. The MAX1907A/MAX1981A are...
SKU: ZZ10.CIC146
BQ24703
BQ 24703The BQ24702/BQ24703 is a highly integrated battery charge controller and selector tailored for notebook and sub-notebook PC applications.The BQ24702/BQ24703 uses dynamic power management (DMP) to minimize bettery charge time by maximizing use of available wall-adapter power. This is achieved by dynamically adjusting the battery charge current based on the total system (adapter) current.The BQ24702/BQ24703 uses a fixed frequency, pulse width modulator (PWM) to accurately control battery charge and voltage....
SKU: ZZ10.CIC145
STM6960
Dual N-Channel Enhancement Mode Field Effect TransistorVDSS 60VID 5.5ARDS (on) mΩ max55 mΩ @ VGs = 10V75 mΩ @ VGs = 4.5V
SKU: ZZ10.CIC144
uP6111A
P6111AThe uP6111A/B is a high performance synchronous-rectified buck controller specifically designed for POL voltage regulation in notebook PC application. The controller operates with 5V bias voltage and converts 2V
SKU: ZZ10.CIC142
ADP3208
The ADP3208 is a highly efficient, multiphase, synchronous buck switching regulator controller. With its integrated drivers, the ADP3208 is optimized for converting the notebook battery voltage into the core supply voltage required by high performance Intel processors. An internal 7-bit DAC is used to read a VID code directly from the processor and to set the CPU core voltage to a value within the range of 0.3 V to 1.5 V. The phase relationship of the output signals ensures interleaved 2-phase operation. The...
SKU: ZZ10.CIC141
TPS2231
The TPS2231 and TPS2236 ExpressCard power interface switches provide the total power management solution required by the ExpressCard specification. The TPS2231 and TPS2236 ExpressCard power interface switches distribute 3.3 V, AUX, and 1.5 V to the ExpressCard socket. Each voltage rail is protected with integrated current-limiting circuitry. The TPS2231 supports systems with single-slot ExpressCard|34 or ExpressCard|54 sockets. The TPS2236 supports systems with dual-slot ExpressCard sockets. End equipment for the...
SKU: ZZ10.CIC140
MAXIM MAX1902EAI
The MAX1901/MAX1902/MAX1904 are buck-topology, step-down, switch-mode, power-supply controllers that generate logic-supply voltages in battery-powered systems. These high-performance, dual/triple-output devices include on-board power-up sequencing, power-good signaling with delay, digital soft-start, secondary winding control, low dropout circuitry, internal frequency-compensation networks, and automatic bootstrapping. Up to 97% efficiency is achieved through synchronous rectification and Maxim’s proprietary Idle...
SKU: ZZ10.CIC138
BQ24753A
The BQ24753A is a high-efficiency, synchronous battery charger with integrated compensation and system power selector logic, offering low component count for space constrained Li-Ion and Li-Polymer battery charging applications. Ratiometric charge current and voltage programming allows for high regulation accuracies, and can be either hardwired with resistors or programmed by the system power-management microcontroller using DAC or GPIOs.The BQ24753A charges two, three, or four series Li+ cells, supporting up to...
SKU: ZZ10.CIC136
ATMEL 25010AN
The AT25010/020/040 provides 1024/2048/4096 bits of serial electrically erasable programmable read only memory (EEPROM) organized as 128/256/512 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low-power and low voltage operation are essential. The AT25010/020/040 is available in space saving 8-lead PDIP and 8-lead JEDEC SOIC packages. The AT25010/020/040 is enabled through the Chip Select pin (CS) and accessed via a 3-wire interface consisting of Serial...
SKU: ZZ10.CIC134
MAXIM 17511G
The MAX17411/MAX17511/MAX17511C/MAX17511N/ MAX17511T are dual-output, step-down, constant on-time Quick-PWMK controllers for VR12/IMVP-7 CPU core supplies. The controllers consist of two high-current switching power supplies for CPU and GFX cores. The CPU regulator (regulator A) is a three-phase constant on-time architecture. The GFX regulator (regulator B) is also constant on-time architecture. The MAX17411 supports 2-phase operation and the MAX17511/MAX17511C/MAX17511N/MAX17511T support 1-phase operation. The...
SKU: ZZ10.CIC133
ISL6232CAZ
The ISL6232 is a high efficiency, quad output controller optimized for converting battery, wall adapter or network DC input voltage into system supply voltages required for portable applications. The ISL6232 includes two PWM controllers generating 0.8V to 5.5V, or fixed 5V and 3.3V outputs. It also features 5V and 3.3V always linear regulators with up to 100mA output current. ISL6232 uses constant frequency current mode PWM control with out-of-phase operation for reducing the input ripple current and the ESR...
SKU: ZZ10.CIC132
MAXIM 8796G
The MAX8796/MAX8797/MAX17401 are 1-phase Quick-PWM™ step-down VID power-supply controllers for Intel notebook CPUs and graphics. The Quick-PWM control provides instantaneous response to fast load current steps. Active voltage positioning reduces power dissipation and bulk output capacitance requirements and allows ideal positioning compensation for tantalum, polymer, or ceramic bulk output capacitors. The MAX8796/MAX8797/MAX17401 are intended for two different notebook CPU/GPU core applications: either bucking...
SKU: ZZ10.CIC131
AS339M
The AS339/339A consist of four independent precision voltage comparators with a typical offset voltage of 2.0mV and high gain. They are specifically designed to operate from a single power supply over wide range of voltages. Operation from split power supply is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. The AS339/339A series are compatible with industry standard 339. The AS339A has more stringent input offset voltage than the AS339.
SKU: ZZ10.CIC129
SMSC KBC1122-AJZS
KBC1122The KBC1122 is an integrated Keyboard/System Management Controller which incorporates a highperformance 8051 Micro-Controller, an LPC Bus Interface which provides a Firmware Hub Interface and integrated Super I/O/LPC Resources. The KBC1122 is powered by two separate supply planes (VCC1, VCC0) to provide “instant on” and sophisticated system power management functions. The KBC1122 power control circuitry supports multiple low power-down modes. The KBC1122 incorporates a Direct Battery Management (DBM)...
SKU: ZZ10.CIC124
ISL6267 HRZ
The ISL6267 is designed to be completely compliant with AMD Fusion™ specifications. The ISL6267 controls two Voltage Regulators (VRs), with three integrated gate drivers. The first VR can be configured as 3-, 2-, or 1-phase VR, while the second output can be configured as 2- or 1-phase VR, providing maximum flexibility. The two VRs share the serial control bus to communicate with the CPU and achieve lower cost and smaller board area compared with two-chip solutions. The PWM modulator of the ISL6267 is based on...
SKU: ZZ10.CIC122
MB 3887
3887The MB3887 is a DC/DC converter IC suitable for down-conversion, using pulse-width (PWM) charging and enabling output voltage to be set to any desired level from one cell to four cells. These ICs can dynamically control the secondary battery’s charge current by detecting a voltage drop in an AC adapter in order to keep its power constant (dynamically-controlled charging) . The charging method enables quick charging, for example, with the AC adapter during operation of a notebook PC. The MB3887 provides a...
SKU: ZZ10.CIC119
EP82569GT
The Intel® 82562GT 10/100 Mbps Platform LAN Connect is a highly-integrated device designed for 10 or 100 Mbps Ethernet systems. It is based on the IEEE 10BASE-T and 100BASE-TX standards. The IEEE 802.3u standard for 100BASE-TX defines networking over two pairs of Category 5 unshielded twisted pair cable or Type 1 shielded twisted pair cable. The 82562GT complies with the IEEE 802.3u Auto-Negotiation standard and the IEEE 802.3x Full Duplex Flow Control standard. The 82562GT also includes a PHY interface compliant...
SKU: ZZ10.CIC116