AP 9402 GYT
VDS = 30VRDS = 18mΩID = 11.5AAdvanced Power MOSFETs from APEC provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness. The PMPAK® 3x3 package is special for DC-DC converters application and lower 1.0mm profile with backside heat sink.
SKU: ZZ10.CIC245
MAXIM 8792 ADC
ADC NCP NCKThe MAX8792 pulse-width modulation (PWM) controller provides high efficiency, excellent transient response, and high DC-output accuracy needed for stepping down high-voltage batteries to generate low-voltage core or chipset/RAM bias supplies in notebook computers. The output voltage can be dynamically controlled using the dynamic REFIN, which supports input voltages between 0 to 2V. The REFIN adjustability combined with a resistive voltage-divider on the feedback input allows the MAX8792 to be configured...
SKU: ZZ10.CIC244
NCP6131
NCP6151S/NCP6151SA/NCP6131S/NCP6131SA dual output four plus one phase buck solution is optimized for Intel VR12 compatible CPUs. The controller combines true differential voltage sensing, differential inductor DCR current sensing, input voltage feed-forward, and adaptive voltage positioning to provide accurately regulated power for both desktop and notebook applications. The control system is based on dual-edge pulse width modulation (PWM) combined with DCR current sensing providing the fastest initial response to...
SKU: ZZ10.CIC242
IRF6721
The IRF6721SPbF combines the latest HEXFET® Power MOSFET Silicon technology with the advanced DirectFETTM packaging to achieve the lowest on-state resistance in a package that has the footprint of a MICRO-8 and only 0.7 mm profile. The DirectFET package is compatible with existing layout geometries used in power applications, PCB assembly equipment and vapor phase, infra-red or convection soldering techniques, when application note AN-1035 is followed regarding the manufacturing methods and processes. The...
SKU: ZZ10.CIC240
TPS 51610
The TPS51610 is a fully Intel-compliant single-phase synchronous buck controller with integrated gate drivers designed for use in low-power CPUs and Intel integrated Graphics solutions for IMVP-6+ generation notebook systems. Advanced control features such as D-CAP architecture and OSR overshoot reduction provide fast transient response, lowest output capacitance and high efficiency. The TPS51610 DAC provides the 5-bit graphics "render" VID. The TPS51610 provides the full compliment of IMVP6+ I/O includingVR_TT,...
SKU: ZZ10.CIC233
NXP IP4772
NXP IP4772 4772 NXP4772The IP4770CZ16, IP4771CZ16, IP4772CZ16 is connected between the VGA/DVI interface and the video graphics controller and includes level shifting for the DDC signals, buffering for the SYNC lines as well as high-level ESD protection diodes for the RGB signal lines.The level shifting functions are required when the DDC controller operates at a lower supply voltage than the monitor. To use this level shifting function the gates of the two N-channel MOSFETs have to be connected to the supply rail...
SKU: ZZ10.CIC229
NCP3218
The APD3212/NCP3218/NCP3218G is a highly efficient, multi−phase, synchronous buck switching regulator controller. With its integrated drivers, the APD3212/NCP3218/NCP3218G is optimized for converting the notebook battery voltage into the core supply voltage required by high performance Intel processors. An internal 7−bit DAC is used to read a VID code directly from the processor and to set the CPU core voltage to a value within the range of 0.3 V to 1.5 V. The APD3212/NCP3218/NCP3218G is programmable for 1−,...
SKU: ZZ10.CIC227
MAXIM 8730E
The MAX8730 highly integrated, multichemistry, batterycharger control IC simplifies construction of accurate and efficient chargers. The MAX8730 operates at high switching frequency to minimize external component size and cost. The MAX8730 uses analog inputs to control charge current and voltage, and can be programmed by a microcontroller or hardwired.The MAX8730 reduces charge current to give priority to the system load, effectively limiting the adapter current and reducing the adapter current requirements.The...
SKU: ZZ10.CIC226
ADP3208D
The ADP3208D is a highly efficient, multiphase, synchronous buck switching regulator controller. With its integrated drivers, the ADP3208D is optimized for converting the notebook battery voltage into the core supply voltage required by high performance Intel processors. An internal 7−bit DAC is used to read a VID code directly from the processor and to set the CPU core voltage to a value within the range of 0.3 V to 1.5 V. The phase relationship of the output signals ensures interleaved 2−phase operation.The...
SKU: ZZ10.CIC216
MAXIM MAX8765E
The MAX1908/MAX8724/MAX8765/MAX8765A highly integrated, multichemistry battery-charger control ICs simplify the construction of accurate and efficient chargers. These devices use analog inputs to control charge current and voltage, and can be programmed by the host or hardwired. The MAX1908/MAX8724/MAX8765/ MAX8765A achieve high efficiency using a buck topology with synchronous rectification. The MAX1908/MAX8724/MAX8765/MAX8765A feature input current limiting. This feature reduces battery charge current when the...
SKU: ZZ10.CIC214
MC34845
For iMac Backlight LED driverThe 34845 series represents high efficiency LED drivers for use in backlighting LCD displays from 10” to 17”. Operating from supplies of 5.0 V to 21 V, the 34845 series is capable of driving up to 16 LEDs in series in six separate strings. The LED current tolerance in the six strings is within ±2% maximum and is set using a resistor to GND.PWM dimming is performed by applying a PWM input signal to the PWM pin which modulates the LED channels directly. An Enable Pin (EN) provides...
SKU: ZZ10.CIC210
CY28548ZXC
• 15 33.27 MHz or 66.669-MHz clock outputs• 1 REF 14.318 MHz • Divide by 2, spread spectrum and output enable all selectable on a per-output basis via I2C register bits • Divide by 2 mode default values strappable on a per-group basis • Output Enable pin controls all outputs • I2C Compatible Programmability With Block and Byte Modes • I2C Operates Up to 1MHz • I2C Address Selection of D0, D2, D4 or D6 • 48-Pin SSOP Package
SKU: ZZ10.CIC207
GMT G528
6528, 6S58 GS58The G528/G528A is an integrated high-side power switch optimized for self-powered and bus-powered Universal Serial Bus (USB) applications.The G528/G528A satisfies the USB standards. The switch's low on-resistance meets USB voltage drop requirements. When the output load exceeds current-limit threshold, G528/G528A switches into constant-current mode and limit the output current to a safe level, which is typically 1.4A. An open-drain flag output is also available to indicate fault conditions to the...
SKU: ZZ10.CIC206
ADP3212
The APD3212/NCP3218/NCP3218G is a highly efficient, multi−phase, synchronous buck switching regulator controller. With its integrated drivers, the APD3212/NCP3218/NCP3218G is optimized for converting the notebook battery voltage into the core supply voltage required by high performance Intel processors. An internal 7−bit DAC is used to read a VID code directly from the processor and to set the CPU core voltage to a value within the range of 0.3 V to 1.5 V. The APD3212/NCP3218/NCP3218G is programmable for 1−,...
SKU: ZZ10.CIC205
ISL 62383 HRTZ
The ISL62381, ISL62382, ISL62383, ISL62381C, ISL62382C and ISL62383C family of controllers generate supply voltages for battery-powered systems. These controllers include two pulse-width modulation (PWM) controllers, adjustable from 0.6V to 5.5V, and two linear regulators, LDO5 and LDO3, that generate a fixed 5V and an adjustable output respectively, and each can deliver up to 100mA. The ISL62383 and ISL62383C have the same outputs as the ISL62381, ISL62382, ISL62381C and ISL62382C but without LDO3 linear...
SKU: ZZ10.CIC203
ISL 6545 CBZ
The ISL6545, ISL6545A makes simple work out of implementing a complete control and protection scheme for a DC/DC stepdown converter driving N-Channel MOSFETs in a synchronous buck topology. Since it can work with either 5V or 12V supplies, this one IC can be used in a wide variety of applications within a system. The ISL6545, ISL6545A (hereafter referred to as “ISL6545x”, except as needed) integrates the control, gate drivers, output adjustment, monitoring and protection functions into a single 8 Ld SOIC or 10...
SKU: ZZ10.CIC202
ENE KB3930QF A1
The ENE KB3930 is a highly customized embedded controller (EC) for notebook platforms. The embedded controller contains industrial standard 8051 microprocessor and provides function of i8042 keyboard controller basically. KB3930 is embedded LPC interface used to communicate with Host. KB3930 is designed with Shared-ROM architecture. The EC firmware and system BIOS will co-exist in single SPI flash. The embedded controller also features rich interfaces for general applications, such as PS/2 interface, Keyboard...
SKU: ZZ10.CIC201
BD9528
BD9528MUV is a 2-channel switching regulator controller with high output current which can achieve low output voltage (1V to 5.5V) from a wide inpute voltage range (5.5V to 28V). High efficiency for the switching regulator can be realized by utilizing an external N-MOSFET power transistor. A new technology calld H3Reg (High speed, High efficiency, High Performance) is a Rohm proprietary control method to realize ultra high transient response against load change. SLLM (Simple Light Load Mode) technology is also...
SKU: ZZ10.CIC200
uP6163AG
Single 12V Input Supply Dual Regulator -Synchronous-Buck-PWM and Linear-Regulator Controller
SKU: ZZ10.CIC199
CX20671-21Z
Conexant's CX20671 HD Audio codec SoC is a low-power,102 dB SNR, highperformanceaudio codec with integrated 2-WRMS (per channel) stereo speakeramplifier with Spread Spectrum EMI dispersion technology. Two independent pairs ofDACs and three independent pairs of ADCs support Multi-Streaming and Real TimeCommunications applications. The audio fidelity of the device exceeds Microsoft WLP4.0 Desktop and Notebook Premium Logo requirements. Additionally, the deviceachieves a high level of integration by featuring an...
SKU: ZZ10.CIC198
uP6111CC
P6111CCThe uP6111CC is a high performance synchronous-rectified buck controller specifically designed for POL voltage regulation in notebook PC application. The controller operates with 5V bias voltage and converts 2V
SKU: ZZ10.CIC197