Supply Voltage: 5V
Dissipation Power: 3.3V
Type: Logic ICs
Parameters:
Working voltage: 3.3V-5V
Working environment temperature: -40 up to 85degree
Supports bus-powered, self-powered and high-power bus-powered USB configurations +1.8V (chip core) and +3.3VI/O interface (+5V withstand voltage)
Use external EEPROM to save operating mode configuration and USB description string configuration data via USB interface
Compatible with UHCI/OHCI/EHCI host controller; compatible with USB2.0 high speed 480Mbps and full speed 12Mpbs
Support USB bulk data transfer mode (512-byte packets in high-speed mode) UART transfer data rate up to 12 megabaud (baud). (PS232 data rate limit is determined by external level shifter), UART interface supports 7 or 8 bit data bits, 1 or 2 stop bits and odd/even/marker/space/no parity
Automatic transmission enable control for RS485 serial applications using the TXDEN pin
USB to asynchronous 245 FIFO mode, transfer data rate up to 8 megabytes per second
USB to synchronous 245 parallel FIFO mode, transfer rate up to 40 megabytes per second
Supports half-duplex, bidirectional data bus, configurable width (1, 2, 4 or 8 bit wide) FT1248 interface
Configurable I/O drive strength (4, 8, 12 or 16 mA) and slew rate
Complete hardware grip or X-On/X-Off software
Bit-bang with RD# and WR# control signal options; options for LED drive signals when transmitting and receiving
Typical Applications:
Single chip USB to UART (RS232, RS422 or RS485)
USB to FIFO/FT1248/JTAG/SPI/I2C
USB to Fast Serial Interface
USB to CPU target interface (as memory) ·USB Instrumentation
USB Industrial Control
USB EPOS Control
USB MP3 Player Interface
USB FLASH Card Reader / Writers
Set Top Box - USB interface
USB Digital Camera Interface
USB Bar Code Reader
Dissipation Power: 3.3V
Type: Logic ICs
Parameters:
Working voltage: 3.3V-5V
Working environment temperature: -40 up to 85degree
Supports bus-powered, self-powered and high-power bus-powered USB configurations +1.8V (chip core) and +3.3VI/O interface (+5V withstand voltage)
Use external EEPROM to save operating mode configuration and USB description string configuration data via USB interface
Compatible with UHCI/OHCI/EHCI host controller; compatible with USB2.0 high speed 480Mbps and full speed 12Mpbs
Support USB bulk data transfer mode (512-byte packets in high-speed mode) UART transfer data rate up to 12 megabaud (baud). (PS232 data rate limit is determined by external level shifter), UART interface supports 7 or 8 bit data bits, 1 or 2 stop bits and odd/even/marker/space/no parity
Automatic transmission enable control for RS485 serial applications using the TXDEN pin
USB to asynchronous 245 FIFO mode, transfer data rate up to 8 megabytes per second
USB to synchronous 245 parallel FIFO mode, transfer rate up to 40 megabytes per second
Supports half-duplex, bidirectional data bus, configurable width (1, 2, 4 or 8 bit wide) FT1248 interface
Configurable I/O drive strength (4, 8, 12 or 16 mA) and slew rate
Complete hardware grip or X-On/X-Off software
Bit-bang with RD# and WR# control signal options; options for LED drive signals when transmitting and receiving
Typical Applications:
Single chip USB to UART (RS232, RS422 or RS485)
USB to FIFO/FT1248/JTAG/SPI/I2C
USB to Fast Serial Interface
USB to CPU target interface (as memory) ·USB Instrumentation
USB Industrial Control
USB EPOS Control
USB MP3 Player Interface
USB FLASH Card Reader / Writers
Set Top Box - USB interface
USB Digital Camera Interface
USB Bar Code Reader
Οι τιμές στο site μας είναι εκπτωτικές!
Για τηλεφωνικές παραγγελίες οι τιμές είναι ελαφρώς μεγαλύτερες.